9 Essential Opening Supplies for a Backyard Pool
Get your backyard ready for summer with these 9 essential opening supplies for a backyard pool. Shop our expert-recommended list and start swimming today!
There is nothing quite like the feeling of pulling back a winter pool cover to reveal the promise of a long, sun-drenched swimming season. However, transforming a stagnant, cold body of water into a sparkling backyard oasis requires a strategic battle plan and the right arsenal of tools. Having the correct gear on hand ensures you spend the opening weekend swimming rather than making frantic, expensive trips to the local pool store.
Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!
Getting Your Pool Ready Before Removing the Cover
Before even touching the cover springs or anchors, preparation is key. Clear the surrounding deck area of leaves, twigs, and debris so nothing falls into the water when the cover comes off. Assess the water level under the cover and ensure you have a plan for where to pump off accumulated cover water safely.
It is also critical to inspect your pool equipment pad before firing up the pump. Check the pump basket, filter pressure gauge, and o-rings for any cracks or dry rot that occurred during the freezing winter months. Replacing a dry-rotted o-ring now prevents frustrating suction leaks when you prime the system.
Pool Cover Pump – Little Giant APCP-1700
Stagnant winter water sitting on top of a solid pool cover is a breeding ground for mosquitoes and organic rot. If you attempt to pull the cover off with this water still on top, you risk dumping hundreds of gallons of filthy, nitrogen-rich sludge directly into your pool. A heavy-duty cover pump is non-negotiable for preserving your pool chemistry before the season even begins.
The Little Giant APCP-1700 is an automatic submersible pump designed specifically to handle this rugged task. It features a built-in mechanical float switch that automatically activates when water levels reach two inches and shuts off once the surface is dry, preventing motor burnout. The integrated handle and wide, stable base make it easy to position on a saggy winter cover without tipping over.
- Max Flow Rate: 1,700 gallons per hour
- Power Cord Length: 25 feet
- Discharge Connection: Standard 3/4-inch garden hose thread
- Activation Level: Turns on at 2 inches, shuts off at 1.5 inches
This pump is ideal for owners of solid safety covers or standard winter tarps who face heavy winter rain or snow accumulation. It is not necessary for those with mesh safety covers, as water drains directly through the mesh into the pool. Keep the intake screen clear of leaves during operation to maintain maximum flow rate.
Pool Brush – SweepEase Aquasphere 18-Inch
Algae spores and microscopic debris cling tightly to pool walls during the winter months. Brushing is the most physically demanding but non-negotiable step in pool startup, as it breaks up the protective biofilm that protects algae from chlorine. Without a thorough brushing, chemical shock treatments cannot effectively penetrate and kill the organisms.
The SweepEase Aquasphere 18-Inch uses a clever aerodynamic design that utilizes water flow to push the brush tightly against the pool walls. Unlike traditional brushes that require massive upper-body strength to keep planted, this brush stays locked to the surface with minimal effort on both the push and pull strokes. The durable construction ensures the bristles do not fall out after a single season of heavy scrubbing.
- Width: 18 inches
- Bristle Material: High-quality, durable nylon (safe for vinyl liners)
- Connection: Standard 1-1/4 inch telepole connection
- Core Technology: Aquafoil design that generates downforce
This brush is an absolute game-changer for anyone tired of aching shoulders and lower back strain after scrubbing algae. It is perfect for vinyl, fiberglass, and plaster pools alike. However, if the pool has a rough aggregate finish with stubborn black algae, a steel-bristled brush is a better fit, though steel should never be used on vinyl.
Leaf Rake – ProTuff 18-Inch Pool Skimmer Net
A standard flat skimmer net is useless for scooping heavy piles of leaves and twigs off the pool floor. A deep-bag leaf rake scoop allows you to gather large volumes of heavy debris in a single pass without constantly emptying the net. Removing this organic material quickly is essential, as rotting leaves rapidly consume your chlorine shock.
The ProTuff 18-Inch Pool Skimmer Net stands out because of its virtually indestructible aluminum alloy frame and deep, double-stitched nylon mesh bag. The heavy-duty plastic scoop front edge easily glides under waterlogged leaves, sand, and twigs without scraping or damaging the pool surface. It is designed to withstand the leverage of lifting wet, heavy debris from the deep end of the pool.
- Frame Width: 18 inches
- Bag Depth: Deep bag capacity for high-volume collection
- Warranty: Lifetime replacement guarantee
- Frame Material: Heavy-duty aluminum alloy
This leaf rake is ideal for pools surrounded by deciduous trees or pine needles where heavy debris accumulation is guaranteed. It is overkill for indoor pools or pools completely shielded by screen enclosures. Because of the bag’s depth, dragging it through the water requires some physical effort when fully loaded.
Water Test Kit – Taylor Technologies K-2006
You cannot treat what you do not measure. Test strips are notoriously inaccurate and hard to read, while a professional-grade liquid test kit provides the exact chemistry baseline needed to balance pool water safely. Guessing on your chemical additions often leads to over-correcting, which wastes money and can damage pool surfaces.
The Taylor Technologies K-2006 uses liquid reagents and a FAS-DPD chlorine test that can measure free and combined chlorine levels up to 20 ppm with extreme accuracy. This precision is vital during startup when chlorine levels must be raised to high levels to kill off winter pathogens. The kit includes a straightforward, color-coded instruction card that guides you through each test step-by-step.
- Testing Methods: Liquid drop titrations
- Tests Included: Free/Combined Chlorine, pH, Acid/Base Demand, Calcium Hardness, Total Alkalinity, Cyanuric Acid
- Case: Heavy-duty plastic carrying case with waterproof chemistry guide
- Reagent Size: 0.75-ounce bottles
This kit is essential for every pool owner who wants to avoid chemical guesswork and pool store upselling. It is not for those who prefer instant, automated readings, as there is a slight learning curve to mixing the reagents and counting drops. Store the kit in a cool, dark place, as heat and sunlight will degrade the liquid reagents over time.
Chlorine Shock – HTH Super Shock Treatment
Winterized pool water often contains chloramines, bacteria, and organic contaminants that survive the cold. A heavy dose of chlorine shock breaks these down, sanitizes the water, and provides a clean slate for the upcoming season. Without a powerful initial shock, your pool will struggle to maintain free chlorine levels once the sun heats the water.
HTH Super Shock Treatment contains 56.5% Calcium Hypochlorite (Cal-Hypo), which delivers a powerful punch of active chlorine without raising cyanuric acid (stabilizer) levels. It dissolves rapidly, reducing the risk of bleaching vinyl liners while quickly clearing cloudy water. This formulation is highly effective at killing bacteria and destroying organic contaminants on contact.
- Active Ingredient: 56.5% Calcium Hypochlorite
- Treatment Rate: 1 bag treats up to 13,500 gallons
- Form: Fast-dissolving granular powder
- Package Size: 1-pound convenient bags
This shock is the gold standard for vinyl, fiberglass, and plaster pools needing a rapid sanitization boost. It is not ideal for pools that already have exceptionally high calcium hardness levels, as Cal-Hypo adds a small amount of calcium to the water. Always dissolve the shock in a bucket of water before pouring it into a vinyl-lined pool to prevent liner bleaching.
Pool Algaecide – PoolRx Algaecide Blue Unit
Algae can ruin a pool opening in a matter of hours if the temperature spikes before the filtration system is fully running. An algaecide acts as a secondary line of defense alongside chlorine to eradicate stubborn algae spores. Utilizing a mineral-based algaecide helps keep the pool clear even if chlorine levels temporarily dip.
The PoolRx Algaecide Blue Unit is a mineral-based purifier that drops directly into your pump basket or skimmer. It continuously releases natural copper, silver, and zinc ions into the water, eliminating existing algae and preventing new growth for up to six months. This continuous ionization process reduces your pool’s overall chlorine demand by up to 50%.
- Pool Size Compatibility: 7,500 to 20,000 gallons
- Lifespan: Up to 6 months of active mineral release
- Placement: Placed directly in the pump basket or skimmer basket
- Active Ingredients: Chelated copper sulfate and silver ions
This unit is perfect for pool owners looking to minimize their chemical footprint and keep algae at bay with minimal daily effort. It is not suitable for pools where metal-related staining is already a severe, unmanaged issue. Ensure your water is properly balanced before dropping the unit in to maximize its effectiveness.
Water Clarifier – SeaKlear Chitosan Clarifier
Once the algae is dead, it leaves behind microscopic suspended particles that make the pool look like a cloudy, milky soup. These particles are often too small for your pool filter to trap on its own. A high-quality clarifier binds these tiny particles together into larger clumps that your filter can easily capture.
SeaKlear Chitosan Clarifier is made from natural shrimp shells, making it environmentally friendly and incredibly effective. Unlike synthetic clarifiers, it cannot be overdosed—overdosing synthetic options actually causes the pool to become cloudier. This natural formula actively removes excess oils, metals, and cosmetics from the water alongside organic debris.
- Formulation: Natural Chitosan polymer
- Dosage: 1 ounce treats 5,000 gallons
- Compatibility: Safe for all filter types (sand, D.E., and cartridge)
- Clarity Method: Environmentally friendly flocculation
This clarifier is excellent for rapidly clearing up post-winter cloudiness in any pool setup. It is not a substitute for a functioning filtration system; if your pump or filter is broken, no chemical clarifier will fix the water. Run your pump continuously for 24 hours after application to achieve the best results.
Stain Preventer – Natural Chemistry Metal Free
Filling your pool with hose water or letting winter leaves sit can introduce heavy metals like copper, iron, and manganese. When you shock the pool, these metals oxidize, leaving ugly brown, green, or purple stains on your pristine pool finish. A metal sequestrant prevents these metals from settling on your pool surfaces.
Natural Chemistry Metal Free is a highly concentrated chelating agent that bonds with dissolved metals, keeping them suspended in the water so they cannot deposit on pool surfaces. Because it contains no phosphates, it will not contribute to algae growth like older, orthophosphate-based stain preventers. It remains stable even in high chlorine environments, which is crucial during spring shock treatments.
- Formula: Phosphate-free chelating agent
- Primary Target: Copper, iron, manganese, and calcium scale
- Dosage: 1 liter treats up to 20,000 gallons
- Compatibility: Works with all pool finishes and filtration systems
This stain preventer is highly recommended for anyone filling their pool with well water or those living in areas with high metal content in municipal water. It is unnecessary if you have pre-tested your water and confirmed a zero-metal profile. Apply this product directly to the pool water around the perimeter before adding shock.
Filter Cleaner – Pleatco FilterWash Tablets
A dirty, oil-clogged filter cannot properly clean pool water, leading to poor circulation and cloudy conditions. Cleaning your filter cartridges or grid elements during startup ensures maximum flow rate and optimal filtration efficiency from day one. Standard rinsing with a hose only removes loose debris, leaving behind stubborn body oils and calcium scale.
Pleatco FilterWash Tablets are fizzing cleaning tablets designed specifically to penetrate deep into cartridge pleats. They quickly release dirt, body oils, lotions, and calcium scale without damaging the delicate filter fabric, outperforming harsh acid washes that degrade filter lifespan. The pre-measured tablet format eliminates the need for messy liquid measuring.
- Format: Fast-dissolving tablet
- Application: Soaking solution (requires a bucket or clean trash can)
- Compatibility: Optimized for cartridge and D.E. filters
- Formula: Phosphate-free, eco-friendly ingredients
This cleaner is ideal for pool owners utilizing cartridge filtration systems who want to extend the life of expensive replacement elements. It is not designed for backwashing sand filters, which require a different liquid sand cleaner formulation. Allow the filter elements to soak for at least 20 to 25 minutes before rinsing them thoroughly with a garden hose.
How to Balance Water Chemistry After Opening
Once the physical debris is gone and the filter is clean, the balancing act begins. Always adjust total alkalinity first, keeping it between 80 and 120 ppm, as it acts as a buffer for your pH levels. If alkalinity is out of whack, your pH will swing wildly, making it impossible to keep the water comfortable and sanitized.
Next, target your pH level, aiming for a range between 7.4 and 7.6. Once the pH is stable, measure and adjust calcium hardness to prevent plaster etching or vinyl damage. Finally, ensure your stabilizer (cyanuric acid) level is between 30 and 50 ppm so your fresh chlorine does not instantly burn off under the spring sun. Let the pump run continuously for 24 to 48 hours during this initial balancing phase to ensure thorough chemical mixing.
Troubleshooting Common Spring Startup Problems
The most common headache during startup is a pump that refuses to prime or pull water. This is almost always caused by an air leak on the suction side, usually a dry or improperly seated pump lid o-ring, or a water level that is too low to reach the skimmer throat. Inspect the pump lid for hairline cracks and apply a silicone-based lubricant to the o-ring to create an airtight seal.
Another frequent issue is “dead spots” in the pool where water does not circulate, leading to localized algae blooms even with balanced chemistry. Adjust your return nozzles downward and in a circular pattern around the pool to eliminate stagnant zones. If the water remains stubbornly cloudy despite chemical balance, check the filter pressure gauge—a 10 psi rise above clean pressure indicates it is time to backwash or clean the filter again.
Taking a methodical approach to opening your backyard pool prevents small oversights from turning into summer-long headaches. With these nine essential supplies in your shed, you can confidently tackle any startup challenge the off-season throws your way. Get your gear organized now, and you will be diving into crystal-clear water before the first hot weekend of the season arrives.
