|

9 Best Mounting Accessories for GPS on a Fishing Kayak

Equip your rig with the 9 best mounting accessories for GPS on a fishing kayak. Upgrade your setup for better navigation and find your next big catch today.

Imagine paddling out before dawn, navigating a tricky estuary, only to have your GPS bounce out of reach or slide into the wet bilge. Securing your navigation electronics is the difference between a successful day tracking structures and a frustrating, expensive salvage mission. The right mounting system keeps your GPS secure, readable, and perfectly positioned for quick adjustments while keeping your hands free for the rod.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

Key Factors to Consider When Mounting Kayak Electronics

Positioning is everything when configuring kayak electronics. You need your GPS close enough to read and adjust easily, but far enough away that it does not interfere with your paddle stroke or rod movements. High-glare environments require mounts with wide ranges of articulation so you can tilt the screen away from direct sunlight.

Structural integrity and deck space are major constraints on a plastic hull. Bolting heavy gear directly to thin polyethylene can cause flexing, which eventually cracks the kayak or strips out the hardware. Choosing the right mounting foundation—whether it is a track system, a rigid deck mount, or a rail mount—distributes the weight and forces generated when slamming through chop.

Accessibility during unexpected situations should dictate your placement choices. If your kayak capsizes, your GPS must remain locked in place rather than sinking to the bottom of the lake. Ensure your layout permits a quick-release function so you can stow expensive electronics in a dry bag when launching through rough surf or packing up at the boat ramp.

Gear Track Base – RAM Mounts Tough-Track Recessed

The gear track is the backbone of modern kayak customization, providing a clean track system that lets you slide, adjust, and swap accessories without drilling new holes in your hull. It serves as the primary structural foundation for all your electronic mounts.

The RAM Mounts Tough-Track Recessed is the ideal choice because its low-profile design sits completely flush with the kayak deck, drastically reducing the risk of catching a loose fishing line or stubbing a toe during a stand-up cast. The high-strength composite track is incredibly durable, meaning it will not warp or crack after years of heavy UV exposure.

  • Recessed flush-mount design to minimize line snags and deck clutter
  • Constructed from high-strength composite and stainless steel hardware for rust-proof durability
  • Compatible with RAM track balls and various third-party T-bolt accessories
  • Available in multiple lengths to match the exact dimensions of your gunnel

Installing this track requires cutting a recess into your kayak, which can be daunting for beginners who prefer not to alter their boat permanently. This product is perfect for experienced anglers who want a clean, factory-installed look and maximum structural stability. It is not recommended for paddlers seeking a quick, drill-free installation.

GPS Ball Mount – RAM Mounts Marine Electronic Mount

A high-quality ball mount bridges the gap between your heavy fishfinder display and the kayak base, absorbing vibrations and allowing for quick, micro-adjustments on the water. Without a dampening mount, water vibration can distort screen images and damage sensitive internal solder joints over time.

The RAM Mounts Marine Electronic Mount utilizes a patented rubber-coated ball design that provides superior holding power and dampens engine or wave vibration. The marine-grade aluminum arm holds heavy displays firmly in place, even when crashing through heavy waves.

  • 1.5-inch rubber ball size (C Size) designed to support medium-sized marine electronics without slipping
  • Universal AMPS hole pattern fits most factory GPS and fishfinder brackets directly
  • Marine-grade powder-coated aluminum construction resists severe saltwater corrosion

The rubber ball can slowly slip if overloaded with massive, nine-inch-plus screens in rough water conditions. This mount is the ultimate choice for recreational anglers using standard 5-to-7-inch GPS units who need quick angle adjustments. It is not suitable for oversized, commercial-grade electronics.

Fish Finder Mount – YakAttack Rectangular Mount

When mounting a heavy, wide-screen fish finder and GPS combo unit, you need a specialized plate that prevents twisting and slipping. A standard ball mount can sometimes suffer from rotational slippage under the weight of larger, rectangular screens.

The YakAttack Rectangular Mount solves this problem by utilizing the innovative LockNLoad track mount system, which offers a completely positive-locking attachment that cannot slip or rotate until you press the release button. The heavy-duty composite top plate is pre-drilled to match the factory brackets of all major electronics brands.

  • LockNLoad track mount technology for patent-pending slip prevention and quick removal
  • Rectangular top plate pre-drilled for popular Humminbird, Garmin, and Lowrance units
  • Fiber-reinforced composite construction designed to withstand harsh marine environments

The LockNLoad base raises the unit slightly higher off the deck than flush options, which can catch wind or a stray paddle stroke. This is the top choice for offshore kayak anglers running heavy Garmin or Lowrance fishfinder/GPS combos on rough coastal waters. It is unnecessary for light, pocket-sized handheld GPS units.

Portable GPS Mount – Scotty 135 Portable Mount

For anglers who do not want to drill holes or who fish from multiple watercraft, a portable mount is essential. It allows you to take your entire GPS setup from your kayak to a buddy’s boat or a rental vessel in seconds.

The Scotty 135 Portable Mount features a self-contained design that clamps securely onto the gunnel of your kayak or small boat. It integrates a compact baseplate with a built-in battery compartment or tackle storage tray, meaning your power source and display stay in one cohesive unit.

  • Heavy-duty clamp-on design fits gunnels up to two inches wide for rapid transfer
  • Integrated base accepts all post-mount Scotty accessories and brackets
  • All-weather composite construction that will not rust or degrade in wet environments

This portable system has a significantly larger footprint than permanent mounts, which can clutter narrow cockpits or interfere with your paddle stroke. It is the perfect option for weekend travelers who rent kayaks or fish from multiple boats. It is not designed for permanent, streamlined tracking setups.

Deck Mount Receiver – Scotty 241 Side Deck Mount

If you prefer a classic, heavy-duty post mount system rather than gear tracks, you need a permanent receiver socket installed on your deck. This receiver acts as the permanent female socket for a wide variety of rod holders, camera poles, and GPS mounts.

The Scotty 241 Side Deck Mount is the industry standard for post-style accessories, offering an incredibly simple, robust connection. It can be mounted on any flat deck surface or vertically on the inside of the gunnel, saving valuable horizontal space.

  • Dual-mounting option for top-deck or vertical side-gunnel installation flexibility
  • Locking push-button mechanism to prevent accidental accessory loss in a rollover
  • High-impact engineering-grade nylon housing that handles immense leverage

Drilling four substantial mounting holes and gaining access inside the hull to secure backing nuts is mandatory for a safe installation. This is the gold standard for budget-conscious anglers who want a permanent, incredibly sturdy point of attachment. It is not suited for paddlers who like to frequently change their accessory layout.

Glue-On Mount Pad – Scotty 341 Glue-On Pad

Inflatable kayaks and stand-up paddleboards present a unique challenge because you cannot drill holes or screw tracks into their air-filled chambers. A glue-on receiver pad provides a secure mounting point without risking a puncture.

The Scotty 341 Glue-On Pad is manufactured from highly flexible, heavy-duty PVC that bonds seamlessly with the exterior skin of inflatable watercraft. Once glued in place, it accepts standard Scotty side deck mounts, opening up a world of mounting possibilities on your inflatable.

  • Flexible PVC backing plate designed for permanent chemical adhesive bonding
  • Accepts the Scotty 241 deck mount (sold separately) for a modular setup
  • Compact footprint that preserves precious deck space on inflatables

Proper surface preparation and high-quality marine adhesive are mandatory to achieve a reliable, safe cure. This pad is essential for inflatable kayak anglers who want to mount a GPS without compromising hull integrity. It is completely unnecessary for rigid rotomolded polyethylene kayaks.

Kayak Rail Mount – Railblaza RailMount 19-25 Base

Many modern fishing kayaks feature rigid metal grab rails, bow rails, or specialized H-rails built directly into the deck. A rail mount allows you to utilize this existing framework without drilling any holes or gluing pads.

The Railblaza RailMount 19-25 Base clamps securely onto round or square rails, providing a stable, non-slip base for your GPS. It uses rubber inserts to grab the rail tightly, ensuring the mount does not rotate when you press buttons on your electronic screen.

  • Fits round rails from 0.75 to 1 inch and square rails with included adapters
  • Tool-free adjustment once the main base clamp is tightened down
  • Features the patented Railblaza slide-lock StarPort for quick device swapping

You must ensure your kayak actually has rigid metal or heavy plastic rails installed before buying. It is ideal for kayaks with factory-installed perimeter rails like Hobie, Native Watercraft, or Wilderness Systems. It is not for bare-deck kayaks that lack rail infrastructure.

Handheld GPS Holder – Railblaza Mobi Device Holder

Anglers navigating with handheld GPS units or smartphones need a secure, weather-resistant holder that keeps the device upright and easily visible. A loose device in a cup holder is a recipe for a water-logged screen or a lost connection.

The Railblaza Mobi Device Holder safely secures small electronics using spring-loaded, rubber-lined retention arms. It features an integrated, high-stretch rubber strap that pulls over the top of your device, locking it in place even during a complete capsize.

  • Adjustable arms fit devices from 2.2 to 3.4 inches wide, including thick cases
  • UV-stabilized engineering plastics with soft neoprene grip pads to prevent scratches
  • Includes a flexible rubber strap for ultimate retention over rough water

You must manually hook the rubber strap over the device every time you mount it, which can slow down one-handed operation. This is the prime solution for casual paddlers utilizing a smartphone or handheld Garmin GPS for navigation. It is not intended for larger, heavy-format multi-function screens.

Extension Socket Arm – RAM Mounts Double Socket Arm

Sometimes, your mounting base is located too low on the deck, or too far forward, making it difficult to read your screen. An extension arm bridges this gap, raising your GPS up and out of the way of your knees and gear.

The RAM Mounts Double Socket Arm is a classic, highly reliable accessory that connects two ball mounts. It features a simple internal spring and a single tightening knob that locks both ends down simultaneously with incredible holding power.

  • Available in short, medium, and long configurations to achieve the perfect height
  • Powder-coated marine-grade aluminum body for maximum strength
  • Single twist-knob operation for instant angle adjustments on the fly

Longer arms create more physical leverage, which can cause the kayak deck to flex under heavy loads if a backing plate is not used. It is a must-have for paddlers who need to raise their GPS over tackle boxes or cup holders. It is not recommended in its longest form for heavy electronics mounted on thin-skinned kayaks.

How to Secure and Waterproof Your Kayak GPS Wiring

Running power from a hull-interior battery to a deck-mounted GPS requires drilling access holes that can compromise your kayak’s buoyancy if not properly sealed. Always use specialized marine thru-hull wiring glands, which seal the cable tightly with a rubber compression gasket. These fittings prevent pooling rainwater or splashing waves from draining straight into your hull.

Corrosion is the silent killer of marine electrical connections. Never rely on standard automotive crimp connectors or electrical tape on a kayak. Instead, use heat-shrink solder sleeves and dual-wall adhesive marine shrink tubing to encase every wire splice. Coat all plug contacts and exposed brass pins in a layer of dielectric grease to block moisture penetration.

Cable management inside the hull is just as critical as the exterior seals. Secure loose wiring runs to the underside of the deck using adhesive zip-tie mounts, keeping them clear of your steering cables and internal storage hatches. Leave a small, loose downward bend—known as a drip loop—right before the wire enters any connection port to shed water away from the plug.

Maintaining Your Kayak Mounting Hardware in Saltwater

Saltwater is incredibly harsh, leaving behind microscopic crystals that lock up sliding mechanisms and corrode even high-quality marine metals. After every trip, a thorough rinse with fresh, low-pressure water is essential to dissolve salt buildup from tracks and locking splines. Avoid high-pressure sprayers, which can force salt crystals deeper into the internal joints of your mounts.

Periodic lubrication prevents the seizing of thumbscrews, ball joints, and track sliders. Apply a light film of marine-grade anti-seize or silicone spray to metal threads and plastic locking splines every few months. This simple step keeps your components adjusting smoothly and prevents them from fusing together over a hot summer season.

Regularly inspect all mounting fasteners for looseness caused by hull flexing and water vibration. Polyethylene kayaks expand and contract with temperature changes, which can slowly back out stainless steel nuts and bolts over time. Tighten any loose fittings by hand rather than with power tools to avoid stripping the plastic or crushing the deck structure.

Conclusion

Choosing the right mounting system turns your kayak into a highly functional fishing platform where navigation is seamless and stress-free. By matching the right base to your specific hull type and securing your wiring, you protect your electronics investment for years to come. Now, lock in your gear, hit the water, and navigate with absolute confidence.

Similar Posts