8 Essential Wakeboard Tower Accessories & Storage Upgrades

Stepping onto a cluttered boat deck with stubbed toes and tangled tow ropes is a quick way to ruin a perfect Saturday on the lake. When a family transitions from casual cruising to active water sports, maximizing every square inch of onboard space becomes a safety priority rather than a luxury. Upgrading a wakeboard tower with the right racks, speakers, and safety accessories clears the floor, protects expensive gear, and keeps the focus entirely on fun.

Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!

How to Assess Your Boat Tower Weight and Tubing Limits

Before bolting any new gear to a wakeboard tower, understanding its structural capacity is a non-negotiable step. Every tower has a strict weight limit divided into two categories: static load capacity (the weight of racks, speakers, and biminis sitting on the tower) and dynamic load capacity (the force exerted while pulling a rider). Exceeding these limits can stress the fiberglass gunwales where the tower mounts, leading to spider cracks, gelcoat damage, or catastrophic structural failure while underway.

To figure out what a tower can handle, look for the manufacturer’s specifications, which typically limit total accessory weight to between 100 and 150 pounds. Keep in mind that a single pair of heavy tower speakers can weigh up to 30 pounds, and a pair of wakeboards in a rack adds another 15 to 20 pounds. Calculate the cumulative weight of every accessory planned for the build before making any purchases.

Equally important is measuring the exact outer diameter of the tower tubing. Marine towers do not use standard sizing; they range anywhere from 1.5 inches to 3 inches in diameter. Use a digital caliper for the most accurate measurement, or wrap a strip of paper around the pipe, mark the overlap, measure the length (circumference), and divide by 3.14 to find the diameter. Getting this number right ensures the mounting clamps fit perfectly without slipping or crushing the aluminum tubing.

Wakeboard Rack – Monster Tower Double Wakeboard Rack

A dedicated board rack is the single best way to reclaim floor space and prevent expensive wakeboards from getting dinged, scratched, or stepped on. The Monster Tower Double Wakeboard Rack solves this problem by keeping two boards completely out of the passenger area and securely stored above the gunwale. It replaces the chaos of boards sliding around the cabin floor with a dedicated, secure home that keeps the boat neat and safe.

This specific rack is built from 6063 aerospace-grade aluminum which is then highly polished and anodized for superior corrosion resistance in both fresh and saltwater. It features thick, UV-resistant rubber inserts nested inside the tines to cushion the boards and eliminate vibration noise while cruising. A heavy-duty, adjustable bungee cord wraps over the boards, keeping them locked in place even when hitting rough chop at high speeds.

• Capacity: Holds two wakeboards up to 1.25 inches thick
• Material: Polished and anodized 6063 aluminum
• Mounting: Universal clamp fits tubing from 1.5 inches to 2.5 inches with included inserts
• Features: Quick-release mechanism for easy removal during trailering or storage

This rack is ideal for families with standard wakeboards who want a durable, rattle-free storage solution. It is not designed for thick, modern wakesurf boards, which require wider tine spacing.

Swivel Board Rack – Krypt Towers Swivel Wakeboard Surf Rack

Standard fixed racks require leaning over the side of the boat to wrestle boards in and out of the tines, which can be difficult and dangerous on choppy water. The Krypt Towers Swivel Wakeboard Surf Rack solves this issue by bringing the boards directly to the passenger cabin. With a simple pull of a release pin, the entire rack rotates 135 degrees inward, allowing riders to load or unload boards safely from inside the boat.

This rack features a specialized hybrid finger design, featuring one slot sized for a standard wakeboard and a wider slot designed to accommodate thick, epoxy wakesurf boards. Built from 6061 aircraft-grade aluminum, the assembly is double-polished for a mirror-like finish that resists water spotting. The heavy-duty swivel plate mechanism operates on a smooth, grease-packed bearing system that resists binding even after years of exposure to sun and moisture.

• Capacity: Holds one wakeboard (up to 1.25 inches) and one surfboard (up to 2.25 inches)
• Swivel Angle: Rotates 135 degrees into the boat interior
• Clamping Range: Options available for tube sizes from 1.75 inches up to 3 inches
• Hardware: Metric stainless steel fasteners included

This swivel rack is the perfect choice for boats with high gunwales, shorter family members, or families who frequently transition between wakeboarding and wakesurfing. It is not the best fit for narrow boats where swinging the rack inward might crowd the rear lounge seats.

Tower Speakers – Wet Sounds REVO 8 XW-B Marine Speakers

Standard cabin speakers are designed to project sound inward toward the passengers, meaning a rider trailing 65 feet behind the boat hears nothing but engine noise. The Wet Sounds REVO 8 XW-B Marine Speakers are engineered specifically to project clear, high-fidelity sound far past the swim platform. They allow the driver to share the music with the rider without having to crank the cabin volume to deafening levels for those on board.

These 8-inch tower speakers utilize a powerful mid-bass driver paired with a coaxial titanium tweeter to deliver crisp highs and deep, punchy bass that cuts right through wind and engine roar. The injection-molded composite enclosures are highly UV-resistant and completely sealed against moisture, carrying an IP67 marine rating. They feature a sleek, modern look with integrated RGB LED lighting that can be customized to match the boat’s interior lighting scheme.

• Driver Size: 8-inch mid-bass with 1-inch titanium tweeter
• Power Handling: 150 Watts RMS / 300 Watts Peak
• Frequency Response: 35Hz to 20kHz
• Waterproof Rating: IP67 marine grade

This setup is ideal for active families who want a premium audio experience for both the rider and the passengers. Because of their high power requirements, these speakers must be paired with a dedicated marine amplifier to perform as intended; they are not a simple plug-and-play addition for a low-power factory head unit.

Tower Bimini – Monster Tower Over the Top Bimini

Long days on the lake can quickly drain a family’s energy if there is no escape from the relentless summer sun. The Monster Tower Over the Top Bimini provides a generous shadow footprint over the main cockpit without interfering with the structural integrity of the tower. By mounting directly to the tower frame rather than the boat deck, it keeps the gunwales clear of obstruction and preserves full walk-around access.

Constructed using genuine Sunbrella fabric, this bimini top offers maximum UV protection and fade resistance, meaning it will hold its deep color for years without rotting or tearing. The frame is built from polished stainless steel tubing, providing the rigidity needed to handle speeds up to 45 mph when fully deployed. It is designed to mount over the top of the tower, preserving precious headroom and keeping the area beneath the tower clear for standing passengers.

• Canvas Material: Premium Sunbrella marine fabric
• Frame Construction: 1-inch polished stainless steel tubing
• Coverage: Approximately 6 feet of forward-to-aft shade coverage
• Compatibility: Designed specifically to fit Monster Tower MT1, MT2, and MTE models

This bimini is perfect for boaters seeking maximum shade coverage while keeping the boat’s interior clutter-free. It is not a universal-fit item, so owners of non-Monster towers must verify exact width and mounting configurations before ordering.

Ensuring Safe Wire Routing Inside Your Boat Tower Legs

Installing electrical accessories like speakers and lights requires routing power and signal wires from the boat’s deck up to the top of the tower. Running wires along the outside of the tubing with zip ties is a recipe for disaster; UV rays will degrade the wire casing, and exposed lines easily snag on life vests, dock lines, or tree branches. Internal wire routing keeps the install looking professional and protects the electrical system from moisture and physical damage.

To do this successfully, use a nylon wire snake or a weighted string blown through the tubing with a shop vac to pull the wires through the hollow tower legs. Always drill wire entry and exit holes at a slight angle rather than straight into the pipe to reduce the stress on the wire bend. Before pulling the wires, install rubber grommets in every hole to prevent the sharp, vibrating edges of the drilled aluminum from slicing through the wire insulation over time.

Ensure you use high-quality, marine-grade tinned copper wire, which resists the green corrosion that destroys standard copper automotive wire in wet environments. Leave a loop of extra wire (a “service loop”) at the bottom pivot points of folding towers so the wires do not stretch or pinch when the tower is collapsed for trailering or garage storage.

Tower Mirror – Roswell Marine Premium Mirror 3″ C-Clamp

A spotter is legally required in almost every state when towing a rider, but a high-quality mirror allows the driver to keep tabs on the action without constantly twisting around. The Roswell Marine Premium Mirror 3″ C-Clamp provides an unobstructed, high-definition view of the rider behind the boat. This reduces driver fatigue and significantly improves reaction time if a rider falls or if another boat approaches from behind.

This mirror features a premium, convex glass insert that provides a wide-angle field of view, minimizing blind spots on both the port and starboard sides. The mounting arm is constructed from CNC-machined billet aluminum and utilizes a heavy-duty C-clamp that locks onto the tower tubing with zero slip. Unlike cheap plastic mirrors that shake violently at cruising speeds, the Roswell mount features an ultra-rigid design that keeps the reflection crystal-clear even in rough water.

• Mirror Type: High-definition convex glass
• Clamp Size: 3-inch C-clamp with reduction inserts for smaller tubing
• Material: CNC-machined billet aluminum
• Adjustability: Multi-axis ball joint for precise positioning

This accessory is a must-have safety upgrade for any boat driver pulling wakeboarders, surfers, or tubers. It is not ideal for towers with very busy mounting zones where finding an unobstructed line of sight to the stern might be difficult.

Tower Light Bar – Lumitec Caprera3 LED Flood Light

As dusk approaches, navigating back to the boat ramp or packing up gear becomes a safety hazard without adequate illumination. The Lumitec Caprera3 LED Flood Light is a compact, high-powered floodlight designed to mount directly to the tower frame, casting a wide beam of light over the deck or the water behind the transom. This light bar takes the stress out of late-evening docking, loading trailers, or finding dropped gear in the dark.

Engineered with proprietary Spectrum technology, the Caprera3 delivers over 1,000 lumens of bright white light, with the ability to switch to a soft blue output to preserve night vision. The housing is constructed from die-cast aluminum with a marine-grade powder-coated finish that has undergone rigorous salt-spray testing. It is completely sealed to IP67 standards, meaning it can handle direct pounding from rain and heavy spray without flickering or fogging.

• Light Output: 1,000+ Lumens
• Color Output: Dual-color (White and Blue)
• Power Draw: Low-draw LED technology (approx. 1.3 Amps at 12VDC)
• Material: Powder-coated die-cast aluminum housing

This light bar is perfect for families who enjoy evening cruises and need reliable illumination for docking and gear cleanup. It should not be used as a headlight while driving at speed, as blinding white lights on a tower can confuse oncoming boaters and violate local waterway navigation light regulations.

Flag Holder – Aerial Wakeboarding Tower Flag Multi-Holder

Displaying a rider-down flag is a legal safety requirement in most inland lakes, but holding it by hand is a distraction for passengers who should be acting as spotters. The Aerial Wakeboarding Tower Flag Multi-Holder mounts directly to the tower, keeping the orange safety flag flying high and visible to all surrounding boat traffic. It ensures legal compliance while keeping the spotter’s hands free to assist the driver or manage lines.

This holder is machined from aircraft-grade 6061-T6 aluminum and utilizes a secure clamp system that holds up to three flags at once. This multi-holder design is perfect for displaying a safety flag alongside a family or country flag without cluttering the deck. The mounting bracket allows for quick angle adjustments, meaning the flags can be angled back while running at high speeds and stood upright when floating.

• Material: Anodized 6061-T6 aluminum
• Capacity: Holds up to three standard 3/8-inch flag poles
• Mounting: Fits tower tubing diameters from 1.5 inches to 2.5 inches
• Hardware: Corrosion-resistant stainless steel bolts

This accessory is an excellent investment for boaters on busy, heavily policed lakes where safety flag visibility is strictly enforced. It is unnecessary for those who only boat on private waters where towing flags are not required by law.

Board Rack Cover – Monster Tower Board Rack Cover

While board racks are fantastic for organizing the boat, leaving expensive wakeboards exposed to hot sun, road debris, and exhaust soot during storage or towing can ruin them. The Monster Tower Board Rack Cover slips over the empty rack tines or directly over the loaded boards to offer a layer of defense against the elements. It prevents UV damage to the board’s graphic top-sheets and stops bugs and dirt from plastering the bindings.

This cover is made from heavy-duty, solution-dyed polyester canvas that is both water-resistant and breathable, preventing mold from growing under the cover if the boards are put away wet. It features a heavy-duty zipper and an adjustable drawstring closure that ensures a snug, flap-free fit even in high winds. The interior is lined with a soft, non-abrasive material that protects the polished finish of the rack and the delicate edges of the boards from scratches.

• Material: Heavy-duty solution-dyed polyester canvas
• Closure Type: Marine-grade zipper and drawcord
• Compatibility: Fits all Monster Tower wakeboard racks and most standard double racks
• UV Resistance: High fade-resistant rating

This cover is highly recommended for boat owners who keep their boats on lifts, in outdoor slips, or parked in driveways where sun and rain are constant threats. It is not designed to be kept on the rack during high-speed highway trailering, as the wind resistance can strain the rack mounts.

Managing Tower Loads and Keeping Passengers Safe on Board

Adding accessories to a tower shifts the boat’s center of gravity upward, which can affect how the vessel handles, especially in tight turns or rough water. A top-heavy boat will roll more in wake crossings, which can surprise passengers and cause slips or falls. Instruct everyone on board to remain seated in the cockpit rather than standing on the rear sun pads or gunwales while the boat is underway.

Never allow passengers to hang, swing, or climb on the tower structure, regardless of how sturdy it feels. Towers are designed to handle vertical pull forces from a tow rope, not dynamic, off-axis loads from people climbing on the frame. Additionally, unless specifically rated by the manufacturer, never tow a multi-person inflatable tube from the top of a wakeboard tower. Tubes create massive hydrodynamic drag that can easily bend a tower frame, rip the mounting bolts out of the fiberglass, or flip the boat in a sharp turn.

Regularly check the mounting bolts at the base of the tower and the quick-release hand knobs. The constant vibrations of running through chop can loosen these fasteners over time. Make it a habit during your pre-launch checklist to physically shake the tower; if there is any play, creaking, or movement at the deck mounts, tighten all hardware before putting a rider in the water.

How to Winterize and Protect Tower Accessories Off-Season

When the summer ends and it is time to pack the boat away, leaving tower accessories exposed to freezing temperatures and damp winter air will shorten their lifespan. Moisture can seep into speaker voice coils, freeze, expand, and ruin the drivers. Likewise, salt residue or road grime left on polished aluminum racks over the winter will pit the metal, leading to dull, chalky oxidation by spring.

Before wrapping or storing the boat, remove all detachable accessories, including wakeboard racks, mirrors, and speakers. Clean all aluminum components with a mild marine soap, rinse thoroughly with fresh water, and apply a thin coat of marine metal wax to seal the surface. Store these items in a dry, climate-controlled space like a basement or heated garage to keep the rubber inserts and electronics safe from extreme temperature swings.

For permanently mounted accessories like light bars or bimini frames, clean them thoroughly and wrap them in protective covers. Apply a dab of dielectric grease to any exposed electrical plugs or wiring harnesses to seal out moisture and prevent corrosion. Taking these steps during the fall ensures that when the ice melts in the spring, your gear is clean, functional, and ready for another season of family fun on the water.

Upgrading a boat tower with the right collection of racks, shade, and safety gear transforms a crowded day cruiser into an organized, high-performance water sports machine. By selecting accessories that match your tower’s physical dimensions and staying mindful of weight limits, you protect both your investment and your passengers. Keep the deck clear, the tunes crisp, and the lines secure, and the lake will remain a source of effortless family memories for seasons to come.