9 Essential Gear Items for Securing Dry Bags on Stand Up Paddleboards
Learn how to attach your dry bags to your SUP with our 9 essential gear items. Secure your belongings and prepare for your next paddleboard adventure today.
Picture paddling out into a glass-calm bay, only for a sudden boat wake to tilt your stand up paddleboard and send your dry bag sliding into the deep. Without the proper tie-downs, a single off-balance moment can transform an afternoon of cruising into a stressful salvage mission. Securing your gear effectively ensures that your keys, lunch, and extra layers remain exactly where you put them, no matter how choppy the water gets.
Disclosure: As an Amazon Associate, this site earns from qualifying purchases. Thank you!
Why Securing Your SUP Gear Matters on Open Water
Open water is inherently unpredictable, where sudden wind shifts and passing boat wakes can destabilize a paddleboard in seconds. When a board flips or tilts sharply, unsecured dry bags quickly become drifting hazards or sink to the bottom. Relying on gravity or cheap, makeshift ties is a recipe for gear loss and unnecessary panic during what should be a relaxing paddle.
Beyond preventing total loss, securing your gear keeps it within arm’s reach when conditions deteriorate. Having to scramble or lose your balance just to grab a water bottle or windbreaker compromises your safety on the water. A locked-down deck allows you to focus on your paddle stroke and navigate currents without constantly scanning the nose of your board.
Properly anchored gear also preserves the board’s stability and glide. An unsecured bag that slides from side to side shifts your center of gravity, making the board twitchy and difficult to track straight. By locking your gear flat and centered, you maintain predictable handling and save valuable energy on long-distance paddles.
Deck Bungee Kit – Seattle Sports Deck Rigging Kit
A reliable deck bungee kit forms the baseline of any paddleboard gear organization setup, providing the flexible tension needed to hold lightweight dry bags flat against the deck. It replaces loose cords with a structured grid, allowing you to slip gear underneath quickly without fumbling with complex knots. This is the foundation of basic deck storage, especially on boards that came without factory-installed bungees.
The Seattle Sports Deck Rigging Kit stands out because it includes marine-grade shock cord, durable lacing hooks, and peel-and-stick pads that adhere securely to fiberglass, plastic, or composite boards. The custom-molded hooks allow you to adjust the tension easily, ensuring your dry bags stay snug without putting excessive strain on the attachment points. It provides a clean, low-profile layout that prevents paddle snags during aggressive strokes.
Before purchasing, note that the adhesive pads require a completely clean, dry surface for proper installation, and curing takes a full 24 hours to achieve maximum bond strength. If your board is inflatable, you will need to swap the adhesive pads for PVC D-ring patches and vinyl glue to ensure a permanent hold.
This kit is perfect for recreational paddlers who want to upgrade a bare hardboard with a reliable, permanent storage grid. It is not the right choice for inflatable board owners who are unwilling to purchase separate vinyl adhesive, or for those who carry heavy, oversized dry packs that require rigid, non-stretch tie-downs.
- Cord Diameter: 1/4-inch heavy-duty shock cord
- Attachment Method: Peel-and-stick adhesive pads (hardboards) or screw-down option
- Best For: Lightweight dry bags, water bottles, and spare life jackets
Suction Cup Mount – SeaSucker Naked Flex Mount
When paddling a rigid fiberglass or epoxy board, drilling holes or applying permanent adhesive patches can ruin the aesthetic and lower the resale value. A heavy-duty suction cup mount solves this by providing temporary, incredibly strong anchor points that can be repositioned as your gear needs change. It bridges the gap between secure storage and damage-free board customization.
The SeaSucker Naked Flex Mount utilizes a powerful 4.5-inch vacuum mount that pulls 120 pounds of holding power, far exceeding the cheap suction cups found on standard bath accessories. It features a built-in thumb pump that indicates vacuum strength, letting you know at a glance if the seal is secure before you launch. The housing is built from marine-grade, UV-stabilized materials that will not degrade under harsh sunlight or saltwater exposure.
Keep in mind that vacuum mounts require a completely smooth, non-porous surface to hold vacuum pressure over extended periods. They will not seal on textured deck pads, brushed finishes, or inflatable paddleboards. A quick rinse with fresh water after use is essential to keep sand and salt crystals from damaging the rubber seal.
This mount is ideal for owners of high-end composite or roto-molded plastic hardboards who want a temporary, robust anchor for their expensive dry cases or camera gear. It is not suitable for inflatable boards or heavily textured decks where a vacuum seal cannot form.
- Pull Rating: 120 lbs of vacuum hold
- Cup Diameter: 4.5 inches
- Compatible Surfaces: Smooth gelcoat, fiberglass, and polished plastic
Locking Carabiner – Black Diamond RockLock Screwgate
When securing critical dry bags containing electronics or car keys, simple snap hooks can easily catch on deck lines and pop open during a capsize. A locking carabiner provides a fail-safe connection between your dry bag’s roll-top buckle and the board’s D-rings. It ensures that even if a wave slams your board upside down, your most valuable gear remains physically locked to the deck.
The Black Diamond RockLock Screwgate features a robust, hot-forged construction with a smooth-operating locking sleeve that prevents accidental gate openings. Its wide basket design easily accommodates thick D-rings, heavy-duty webbing straps, and multiple dry bag buckles simultaneously. The square hinge end keeps the carabiner aligned properly, reducing the risk of cross-loading under tension.
While designed for climbing, this aluminum carabiner performs beautifully in freshwater, but requires basic maintenance in marine environments. Saltwater can cause the screwgate threads to bind over time if they are not rinsed with fresh water and occasionally lubricated with a dry marine lubricant.
This is a must-have for paddlers carrying expensive electronics, medical kits, or camping gear in rough or moving water. It is not necessary for casual paddlers who only carry low-value, buoyant gear like towels or water shoes.
- Gate Type: Screwgate manual locking mechanism
- Material: Lightweight, hot-forged aluminum
- Best Uses: Securing main dry bags, keys, and pelican cases to D-rings
Tie-Down Strap – NRS 1-Inch Blue HD Utility Strap
Elastic bungees are excellent for light gear, but heavy dry packs or camping coolers will stretch them, allowing the load to shift dangerously during sharp turns. A static tie-down strap locks heavy gear directly to the board’s D-rings, eliminating any side-to-side play. This rigidity is crucial when paddling loaded touring boards in windy or choppy conditions.
The NRS 1-Inch Blue HD Utility Strap is a legendary piece of river gear, featuring a polypropylene webbing construction that boasts a 1,500-pound breaking strength. Unlike nylon, this webbing will not stretch when wet, keeping your load perfectly tight throughout a long day of paddling. The dual stainless steel springs in the heavy-duty cam buckle bite down hard on the strap, preventing any slippage under load.
When using these straps, avoid over-tightening them on inflatable paddleboards, as excessive tension can strain the D-ring seams or distort the board’s shape. Always tuck away the excess strap tail to prevent it from dragging in the water or wrapping around your ankles during a fall.
This strap is the gold standard for multi-day expedition paddlers, fishermen carrying loaded coolers, and anyone transporting heavy, dense cargo. It is overkill for light, recreational day trips where simple bungees are sufficient.
- Webbing Material: UV-protected polypropylene
- Buckle Type: Custom cam buckle with dual stainless springs
- Available Lengths: 1 foot to 20 feet (4-foot to 6-foot is ideal for SUP decks)
Glue-On D-Ring Patch – NRS PVC D-Ring Patch
Many inflatable stand up paddleboards come with minimal D-rings, leaving you with no way to secure gear on the nose or tail. A glue-on D-ring patch allows you to customize your board’s storage capacity by adding solid anchor points exactly where you need them. It turns a basic recreational board into a fully functional touring vessel capable of holding heavy dry bags.
The NRS PVC D-Ring Patch features a thick, heavy-duty PVC patch material that wraps around a marine-grade stainless steel D-ring. The wide surface area of the patch ensures a massive bonding zone, spreading the pulling force evenly across the board’s outer skin to prevent peeling. The stainless steel ring resists rust and corrosion even when permanently exposed to harsh, salty environments.
Installing these patches requires careful preparation and the correct adhesive, such as Clifton Hypalon Adhesive or Stabond, depending on your board’s material. The gluing process must be done in a dry, low-humidity environment with proper curing time to ensure the patch does not peel off under tension.
This product is perfect for inflatable SUP owners who want to customize their board’s rigging for multi-day trips or fishing setups. It is not suitable for hard composite boards, which require epoxy-in or suction cup mounts rather than PVC patches.
- Patch Material: Heavy-duty PVC
- Ring Material: 1-inch stainless steel
- Compatibility: Inflatable PVC boards and kayaks
Deck Mesh Bag – SUP Now Paddle Board Deck Bag
If you need quick access to items like sunscreen, snacks, or water bottles, opening and closing a roll-top dry bag while balancing on a board is highly inconvenient. A deck mesh bag sits flat on your board, providing a contained space for smaller accessories while keeping them visible and within arm’s reach. It complements your main dry bag by housing the gear you need to access while actively paddling.
The SUP Now Paddle Board Deck Bag is designed with a low-profile mesh top that allows water to drain instantly, preventing your gear from sloshing around in a pool of water. It features a heavy-duty, corrosion-resistant zipper that operates smoothly even when coated in dried salt spray. The bag includes four corner clips that snap directly onto your board’s existing D-rings, keeping it centered and flat.
Because the mesh design is open to the elements, this bag provides zero water protection on its own. Any items stored inside must either be waterproof themselves or placed inside small, individual dry sacks before being zipped into the mesh bag.
This deck bag is ideal for recreational paddlers who want organized, quick-access storage for non-sensitive gear on warm, sunny days. It is not suitable for keeping electronics, dry clothing, or food dry during your paddle.
- Material: Marine-grade mesh and nylon
- Attachment: Heavy-duty plastic clips with adjustable straps
- Features: Exterior water bottle holder and quick-pull zippers
Waterproof Dry Case – Pelican 1120 Protector Case
Standard roll-top dry bags protect clothes and towels well, but they offer zero crush protection for delicate, high-value gear like phones, car fobs, and action cameras. A rigid, waterproof hard case provides an impenetrable barrier against both water pressure and physical impacts. If you drop your board or paddle over shallow rocky shoals, a hard case ensures your electronics survive the journey.
The Pelican 1120 Protector Case is constructed from high-impact copolymer polypropylene, making it virtually indestructible under normal paddling conditions. It features an open-cell core with solid wall design, a watertight O-ring seal, and an automatic pressure equalization valve that keeps water out while balancing air pressure. The double-throw latches snap shut with reassuring force, ensuring the lid remains sealed even if the case is tossed around in rough surf.
When packing this case, ensure the rubber O-ring is free of sand grains, hair, or salt crust, as even a tiny piece of debris can compromise the watertight seal. While the case floats, it is wise to run a locking carabiner or utility strap through the molded padlock protectors to keep it secured to your board’s deck rigging.
This case is a vital asset for paddlers carrying expensive smartphones, keys, cameras, or emergency flares in challenging water conditions. It is not necessary for those who only carry soft items like extra layers or snacks.
- Ingress Protection: IP67 waterproof and dustproof
- Interior Dimensions: 7.25″ x 4.75″ x 3.06″
- Key Features: Pick-and-pluck customizable foam interior, automatic purge valve
Marine Bungee Cord – Better Bungee Polyurethane Cord
Standard fabric-wrapped rubber bungee cords degrade rapidly when exposed to saltwater, UV rays, and constant moisture, eventually losing their elasticity and snapping without warning. Upgrading your board’s tie-down lines to a marine-grade, high-performance cord ensures consistent tension and long-term durability. It is a simple upgrade that prevents unexpected gear loss on the water.
The Better Bungee Polyurethane Cord is molded from a proprietary polyurethane compound that contains no rubber, making it completely resistant to UV damage, salt water, oil, and household chemicals. It can stretch up to twice its original length without losing its spring-back memory, ensuring a tight hold on your dry bags trip after trip. The non-marring nylon hooks are molded directly into the cord, preventing rust and protecting your board’s finish from scratches.
Because polyurethane bungees exert a stronger snap-back force than traditional rubber cords, caution is required when stretching and fastening them to avoid slips. Ensure the hooks are fully seated on your board’s D-rings or deck loops before releasing tension.
This is the perfect upgrade for paddlers who frequently navigate coastal saltwater environments or store their boards in high-heat areas like cars or sunny docks. It is not necessary for occasional, freshwater paddlers who are content with replacing cheap fabric bungees every season.
- Material: High-tech polyurethane (no rubber or latex)
- Hook Type: Integrated, non-scratching glass-filled nylon hooks
- Durability: Safe for saltwater, gasoline, and extreme temperatures
Deck Pack – OverBoard Waterproof SUP Deck Bag
For long-distance touring, a standard dry bag sliding around under loose bungees is inefficient and insecure. A dedicated deck pack combines the absolute waterproofing of a dry bag with the structured, low-profile design of a deck organizer. It mounts flat to your board’s deck, minimizing wind resistance while keeping a large volume of gear perfectly dry and accessible.
The OverBoard Waterproof SUP Deck Bag is built from heavy-duty PVC tarpaulin with electronically welded seams, earning a solid waterproof rating that survives brief submersion. It features a reliable roll-top sealing system and a specialized flat-bottom shape that sits flush against your board’s deck pad. The exterior is equipped with a bungee rigging system for quick-access items and side mesh pockets for wet gear.
Mounting this deck bag requires four secure anchor points on your board, which are connected via the included adjustable buckle straps. If your board lacks forward D-rings, you will need to install glue-on patches or use suction cups to secure this pack properly.
This deck bag is the ultimate storage solution for distance paddlers, SUP campers, and coastal explorers who need to carry substantial gear in wet conditions. It is not ideal for casual paddle boarders who only need to carry a car key and a single water bottle.
- Capacity: 22 Liters of dry storage
- Waterproof Rating: IP66 (floats and handles quick submersions)
- Attachment System: Four corner adjustable buckle straps
How to Balance the Weight Distribution on Your SUP
Storing gear on a stand up paddleboard is not just about keeping it from falling off; it is about maintaining the board’s trim and stability. Placing a heavy dry bag too far forward will cause the nose of your board to plow into the water, slowing you down and making steering sluggish. Conversely, positioning heavy gear too far back sinks the tail, creating drag and lifting the nose, which makes the board susceptible to catching the wind.
The goal is to keep the heaviest items centered along the board’s centerline and as close to the carrying handle as possible. This area, known as the sweet spot, is where the board is widest and most stable, allowing it to handle extra weight without tipping. If you must use the front deck rigging, pack lighter items like clothing and sleeping pads forward, while keeping dense items like water flasks close to your standing position.
Always test your loaded board in shallow water before heading out on a long paddle. Take a few strokes to feel how the board tracks and responds to turns, adjusting the gear forward or backward until the board rides flat on the water. A well-balanced board glides effortlessly, reducing fatigue and keeping you in control when waves hit.
Protecting Your Gear Against Saltwater Corrosion
Saltwater is highly destructive to marine gear, capable of corroding metals, seizing zippers, and degrading plastics within a single season. The combination of salt, moisture, and intense UV rays creates a highly corrosive environment that attacks even stainless steel over time. Protecting your investment requires a proactive post-paddle maintenance routine every time you come off the ocean.
After every saltwater session, thoroughly rinse all of your securing gear, including carabiners, tie-down straps, and deck bag zippers, with clean fresh water. Pay special attention to moving parts like spring-loaded gate hinges and cam buckles, flushing out any salt crystals that can cause jamming. Allow all gear to dry completely in the shade before storing it, as packing damp gear away can lead to mold and localized corrosion.
Periodically apply a thin coat of marine-grade silicone spray or dry lubricant to metal springs, zipper tracks, and carabiner gates to keep them operating smoothly. Avoid using heavy oils or grease, which attract sand and grit that act like sandpaper inside delicate moving parts. Taking these simple steps ensures your safety gear functions flawlessly when you need it most on the water.
With your gear securely locked down and properly balanced, you can paddle with the confidence that your equipment is safe from unexpected spills. Investing in the right combination of rugged tie-downs, dry storage, and corrosion-resistant hardware keeps your focus on the horizon rather than on your deck. Secure your board, plan your route, and enjoy a worry-free day on the open water.
